Velvet Gold Gloss Enamel
Velvet Gold
GLOSS ENAMEL
Velvet Gold Gloss enamel for painting wood, metal and wall surfaces, it offers a smooth, long lasting and washable finish. To get the best result, it is suggested to use our below products before applying satin enamel
features and specifications
- Economic Quality Gloss Enamel.
- Coverage : 100-120 Sq.Ft./ Ltr./ Coat.
- Application on Wood, Metal and Concrete Surfaces
How to apply
Step 01
PRIMER
Apply A coat of classic Gold Metal primer red Oxide on steel or iron surface and a coat of white primers (Solvent Thinnable) on walls or wooden surface
Step 02
PUTTY
Metal surface : Apply a Coat of classic Gold Knifing Paste Filler
Walls and Wood Surface : Apply a Coat of classic Gold Premium Acrylic Wall Putty
Step 03
PRIMER
Primer Coat
Step 03
TOP COAT
Two or Three Coats of Velvet Gold Gloss Enamel
ADDITIONAL INFORMATION
- The Golden rule for removing any wall stains is that one should remove it immediately.
- Remove all dirt using a clean cloth or duster. Always remove dirt from top to bottom, this helps in avoiding loose dirt to smudge the walls.
- For regular household stains like pencil, tea, coffee, crayons etc, use 5% soap/ detergent solution. Use a sponge to remove the stains
- In case of tough stains like turmeric, sketch pen, use a mild detergent solution (e.g Pril, Vim Liquid etc) for cleaning the stains.
- Plaster new masonry surfaces must be allowed to cure completely. It is recommended to allow 28 days as the curing time for new masonry surfaces.
- Cleaning surface should be free from any loose paint, dust or grease. growths of fungus, algae or moss should be removed by wire brushing and water. In case of areas having excessive dampness use Goyal Paints damp guard to limit further dampness.
- Filling for cracks for gaps on all interior absorbent surfaces, use Goyal Paints putty as per recommended procedure.
- Do not apply when ambient temperature is less than 10°C or if the temperature might drop to this level within 4 hours of application.
- Do not over-thin or over-extend the brush.
- Tint using Goyal Paints machine colorants only
- Stir well and strain before use
- Tinted paints need thorough shaking immediately after tinter addition as well as before use.
- Store the container with the lid tightly closed in an upright position, in a cool, dry place
- Keep out of reach of children and away from eatables
- May be harmful if swallowed. In case of ingestion seek immediate medical attention.
- Wear eye protection during application. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
- In case of skin contact immediately wash skin with soap and plenty of water. Get medical attention if irritation develops or persists.
- Do not breathe vapour or spray.It is recommended to wear suitable nose pad during sanding and surface preparation to avoid dust inhalation
- Left-Over Paint Disposal: Left-over paint/drums should not be disposed in soil/drains.
- Consumers should consult a local recycling agency for proper disposal of paint/drums.
Get Free Estimate :
0731-2972932, 84610 63466